To upgrade Wanguard and Wansight to version 8.4, please follow these steps in the given order:

1. Upgrade unsupported operating systems
   ▪ If you're running CentOS 8, upgrade to Rocky 8 or AlmaLinux 8. CentOS 8 has reached End Of Life and is no longer supported.
   ▪ Debian 8, Debian 9 and Ubuntu 16 have also reached End Of Life. Upgrade to at least Debian 10 or Ubuntu 18.
   ▪ If upgrading the distribution is no longer possible, follow the Console transfer steps to copy the data to a new system.
2. Log in to the web interface
   ▪ Go to Configuration » Components and stop all components.
3. Log out of the web interface
   ▪ Select your user menu from the top-right corner and choose Log Out.
4. Stop the WANsupervisor service on all servers:
   [root@localhost:~]# service WANsupervisor stop
5. Update the Capture Engine (if applicable)
   ▪ If you’re using PF_RING, update it to PF_RING 8.8.
   ▪ If you're using Netmap, update it to a Git version from around December 2024.
   ▪ If you're using DPDK, update it to version 24.11.
   
6. Upgrade the software packages, starting with the Console server
   ▪ Important: Do not upgrade the Linux distribution at this point (e.g., from Ubuntu 18 to 20).
   
   On RHEL/Rocky/AlmaLinux 8, run:
   [root@localhost:~]# rpm -Uvh https://packages.andrisoft.com/rhel8/wanrepo-8.4-0.noarch.rpm
   [root@localhost:~]# yum upgrade
   On RHEL/Rocky/AlmaLinux 9, run:
   [root@localhost:~]# rpm -Uvh https://packages.andrisoft.com/rhel9/wanrepo-8.4-0.noarch.rpm
   [root@localhost:~]# yum upgrade
   On Debian 10, run:
   [root@localhost:~]# echo "deb https://packages.andrisoft.com buster main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Debian 11, run:
   [root@localhost:~]# echo "deb [signed-by=/usr/share/keyrings/andrisoft-keyring.gpg] https://packages.andrisoft.com bullseye main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Debian 12, run:
   [root@localhost:~]# echo "deb [signed-by=/usr/share/keyrings/andrisoft-keyring.gpg] https://packages.andrisoft.com bookworm main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Ubuntu 18, run:
   [root@localhost:~]# echo "deb https://packages.andrisoft.com bionic main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Ubuntu 20, run:
   [root@localhost:~]# echo "deb https://packages.andrisoft.com focal main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Ubuntu 22, run:
   [root@localhost:~]# echo "deb https://packages.andrisoft.com jammy main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   On Ubuntu 24, run:
   [root@localhost:~]# echo "deb https://packages.andrisoft.com noble main" > /etc/apt/sources.list.d/andrisoft.list
   [root@localhost:~]# apt update
   [root@localhost:~]# apt dist-upgrade
   • Ensure you upgrade the software on all servers, not just the Console server. It’s crucial to run the same software version everywhere.
   
   
7. Start the WANsupervisor service on all servers:
   [root@localhost:~]# service WANsupervisor start
8. Log in to the web interface again
   ▪ Go to Configuration » Components and start all components.
9. Review the relevant release note(s)
   ▪ Check for additional details or changes introduced in this release.

Your feedback is highly appreciated! If you encounter any issues, please contact Esta dirección de correo electrónico está siendo protegida contra los robots de spam. Necesita tener JavaScript habilitado para poder verlo..